Early Jukeboxes had no free credit switch--it was added by most makers--but I do not recall when, on Wurlies ?? If there--it's a small, black, side switch, on the keyboard-- Ron Rich The black side switch on the back of the keyboard is not doing anything. What else do you can you recommend thanks G...

Ron Rich wrote:Do you have credits ??
Ron Rich

Good question

I don't think the coin slot is working , I sent some change down the chute with no results.

I have a key on order for the back , Is there a lever or button that I can manually add credits

Thanks Gregg

I moved the plunger in the rear of the assembly and the record fell back into the rack.

None of the buttons are operational yet , is there a reset or something else I should look for

thanks Gregg

Greg, NO!! Do not "ADJUST" nothing !!! The safety switch does not need adjusting, unless it is defective, or has been changed ! If pushing the "record cancel switch" (WurliTzers term) removes the record from the TT, the safety switch is working fine--if not, and the record is &q...

I just found the safety switch in the service manual , I will adjust that and see if that works.

Thanks Gregg

Greg, Is the Safety switch activated ? Attza whut it sounds like--Have you properly oiled the turntable shaft (hole) ?? BTW--You can only hope it NEVER "ejects" any records--as usually when any jukebox does this, it ruins the record ! Ron Rich Hi Just to be clear , if in the middle of pla...

I just picked up a Wurlitzer 2600 that seemed to be in working order. It would play selections one at a time usually fine , sounded great. Once in a while though the record would come up and you could see the 45 plunger go in and then out and the record would not turn. If you hit the eject button on...

Nevermind I found one on Needles4jukeboxes.com

thanks anyway

That fuse is only for the wallbox supply. 15Amp is way too much. I replace those old fuse holders with a standard AG types as used elsewhere and 4 amp/slo for my locations. If you have only one wallbox, use a 3 amp/slo. Rob-NYC Here is a pic , the machine wont select a record if this is not inserte...

I have a K200 AMI and the transformer schematic calls for 3.2a fuse .Installed is a 15a buss tron fuse that is working But I am wondering if this is dangerous to use it.
Having trouble tracking down the correct 3.2a fuse , any alternatives?

thanks Gregg

Hi Greg, The only thing the video shows is that the pulse generator is operating the pulse converter, which has it's cover laying on the side, doing no good---and that a record is on the TT, but the tone arm is not on the record ? Ron Rich That's all it does What other part of the box would you lik...

Here is a video that shows what is going on. Notice that the basket never moves

https://youtu.be/GJfHBPomWCs

thanks Gregg

Hi Greg, If you are saying that the basket quits turning at a selected pin, that is the correct operation, to that point. At that point, the gripper motor should get power, and put the record on the turn table. I would first check that the gripper motor is, or is not getting power ( 25-30 volts) ( ...

1960 Ami K JDK-200, after selection magazine won't turn . After a record is selected the brush arms and pin selector in back turns , stops at a selection then nothing else happens

what should I look for at this point

thanks Gregg

Actually
If someone has one I can use for a day , just using it to make a silicon mold to make 2 sets. Will pay shipping both ways.

Again just need only one of the v's , not the whole assembly

Thanks Gregg