hi
it looks as if the control unit is not working correctly the control unit is under the mech on right hand of the turn table 2 bolts hold it from the top just clean the contacts with a very/very fine wet/dry tom

hi try victory glass they are based in usa i think the web page is
www,victoryglass.com
they have loads of spare parts tom

HI GARY
I HAVE A COMPLETE CONTI ONE MONO AMP PLUS A SPARE PRE AMP PART NUMBER MAIN AMP R2017B -- PRE AMP L2156A X2 COMPLETE WITH ALL VALVES INCLUDIND 2 6973 EMAIL ME OFF FORUM ON


EMAIL----thomas.leigh@btinternet.com

hi
nsm problem-- the problem might be the relays on the control/power board give them a good clean with very very fine wet/dry plus make sure the points are closing correctly tom

hi
subject of 6973 valves victoryglasss.com sell them i have just paid $100 --

hi i have a ami and i like the sound of the old tannoy white egg cartride when the old 45s are been played on the crackle side check the light tubes to see that they are not loose they some times can cause crackle on the speakers tom

SORRY TONY WRONG JUKEBOX IF YOU KNOW THE PROBLEM CAN YOU HELP THE GUY/DOLL OUT WITH THE SCAN PROBLEM TOM

hi tony do you mean the 1 large selonoid which is on the record mech
i mean the one,s in the control unit box in back of jukebox which control the scan it allows the record mech to do 2 travels up and down and then stops the record mech tom

your problem could be in your control panel inside the panel is a set of selonoids side by side which operate a set of rachets which operate a set of points the problem could be the selonoids are sticking give all the parts a good clean WITH THE POWER PLUG OFF OFF?? that should sort your problem out

hi i have the parts but postage is too costly but i live in u/k you should be able to pick up the parts in usa all rock ola,s from 1967-1975 about that era have the same mech with the 3 micro swithes at the back of the gripper arm unit -- try this group some one shoulb be able to help you tom http:/...

hi
with all that wear and tear on your jukebox you will be better off fitting another gripper arm unit plus a control unit -0 the one under the right hand of turntable and change all the microswithes on the end of the gripper arm unit i have these parts but where do you live