I figured it out. It was the Release lever adjusting screw. Had it backed out too far where it wasn't letting the number latch release. Something so simple...thanks again for all your help. I'm slowly becoming a juker!

Lol...definitely the Jepetto. Yes the number stays down but the solenoid won't relax, TOTALLY, until I manually release the number latch.

Hey Ron thanks for replying. I have it selecting songs and they are playing correctly selected songs. My problem now is when I select a song, the carousel starts turning, something clicks, then the solenoid below the keyboard reverses releasing the letter latch but not the number latch. I then manua...

I have a Wurlitzer 3500 and the selector buttons were sticking, as well as some of the latch pins weren't popping up. I used my manual and started adjusting all the selector latches and such. Now all of a sudden I have no power to the latch solenoid. Don't know what I did as I said I was following t...

I have a Wurlitzer 3500 and it sounds great. The problem is it only sounds great through the two speakers on the left, bottom and top. Also have a receiver plugged into the phono jacks and only get sound from the left also. I've checked the wiring and everything looks right. A channel has both black...

Ok, verified that the micro switches are good and made adjustments on various things. I found what looks like the main cam motor brake solenoid isn't connected to the bracket that pushes the pad up against the brake wheel. Then I noticed that when I spin the brake wheel, the main cam spins. I rememb...

Are you talking about the "magazine lock" on the outside of the record carousel? If so, yes it is working. I used my manual and adjusted the override assembly and made sure the magazine lock was working.

Thanks for responding. I got the turntable speed figured out but while doing some final adjustments I've done something and now the record clamp doesn't work. I make a selection, the magazine turns to the record, then nothing. The record clamp doesn't grab the record and take it to the turntable. I ...

Thanks for responding. I did change the belts already. When it comes to the motor, what kind of oil do I use? Also, when you say bad/oily/dirty, are you talking about the turntable itself or the shaft on the motor?

Recently picked up a Wurlitzer 3500 and am anxious to get it up and running. I've made adjustments, found broken pieces, ordered new pieces, and am still trying to get there. The record clamp pins were broken so when a record went to play the clamp stayed on it bogging it down. I can manually hold t...