Left side light is on.

"check for motor start / carry over "switch" : you mean the contact behind the letter buttons ?

Another photo of wiper back, what's your opinion ?

I assume credit is established because "light" is on, by moving backward the credit wheel. To be sure, what I mean by "wiper plate" is what is called "motor carry-over segment" on figure 14. Do I need to remove something to check for "carry-over/motor start contact...

No resistance :-\

If I ground (for a short time, only a small touch) the wiper plate, it goes to "credit position".
And if I stay grounded it goes full circle.
In case it's a useful info ?

I used some french product called "miror" to clean "brass" and then used Alcohol to clean any residue. Yes wiper is in "rest position". I have to manually push it to "credit position" to be able to push selections buttons. Sorry, not sure to understand what yo...

Hi Ron Rich, I have re-checked "carry over" switch like stated in the "contact arm position" in the manual. "V" form is perfect. I also cleaned contact, no major improvement. How do I check for grounding of the plate ? Again, thanks a lot for your help. http://img15.hos...

Hi Rob-NYC, I don't understand what's wrong... With white lead (cancel coil) removed from DPU (but same happen if resolder to DPU: Black lead grounded --> it make a full circle but doesn't goes to credit position, only rest. Orange lead grounded --> it stops before a full turn (see photo). And if I ...

Thanks Ron for pointing me to the list. But before requesting a new coil, I'd like to be sure that it's defective ? How can I check it ? Is my diagnosis good with continuity test ? Also, I haven't figure how to remove it, screw is behind, I have no access to it, any idea how to remove coil from WOM ...

I've done some continuity test. I found that White / Orange leads or Black / Grey leads on the DPU leads gives continuity if I touch grounding (WOM frame for instance). Am I right thinking this is not normal, as when I do it with other colours I have no continuity ? Is the cancel coil shot ? Do I ha...

I'm back again, with a trouble... Here is what I have done : I though I could disconnect the coil by unsolder the white wire, but I was wrong. And I had difficulty to unsolder, so maybe it heat up too much ? So I finally have resolder white leads, but now freeplay doesn't work anymore. If I ground o...

Hello Rob, Thanks a lot for your very detailed reply. I had found the trick for the credit light, but wasn't able to find the way to turn into free play. Thanks a million times, I've just test it and it works great. You're an ACE ! Now it's time for me to clean this WOM and convert it to wiPod, shou...

Hello, I have a consolette Seeburg ED 3WA 22, with a Dual Pricing Unit. Got it powered with a transformer, but unfortunately, water get it's way in the coins hole. Coin switches are rusted. So I cannot use the coin mechanism, so I would like to convert the consolette to freeplay and later use it wit...

Hi,

I have some NOS (in the box) extra blue T needles, from a french company "Europson" that I could sell, make me an offer via MP.

WB0H WB4H : no song played. WB3 or : can play only the first 100 songs, make sense as code is for 100 selections. WB4 : all selections played I assume the motor of the wallbox is already in 50Hz, as it's for french market. I still get the same symptom : "sometimes the new selection stop the pla...

Hi everybody, Everything is connected (amp, speakers, transformers...), but I have a random "error" : I first make a selection, then add more while song is playing, but sometimes the new selection stop the playing song. Sometimes at 2nd selection, sometimes at 5th, or 3rd, or 7th... Wipod ...

By any luck, can someone post a good pic of the first glass on left, so that I can reproduce it ? Mine is altered and in french...
Thanks in advance.