Hi, Roger, You should have given me a call, Yep the mech was oiled, and the speed unit recapped, I am pleased you bought a manual like I said but you did not read it like a novel several times over before something went wrong with the jukebox. When a jukebox goes wrong like that it is usually somet...

Hi Ron
It was Section 7 Page 4 Manual No 491693 .
Harry I said about is .... djricksha

Roger.

Hi Ron , Which plane would you like , could possibly pay for a Tiger Moth but not sure if you would get a big bag of tools in it . Anyway I will keep trying and when I have pulled my hair out I will get someone round . What I would like to say is A BIG THANKS for all your help and will let you know ...

Me again Ron , Just tried to get my hand to the detent release lever not a lot of room so not sure if I found it or not , tried to feel my way around to see if I could move something , switched jukebox on now back to playing records on it's own again , so when it was selecting the next record I tapp...

Hi Ron ,
found in the service manual the detent release lever , but will have to have a look in the morning as not sure as yet just which it is
and would think best to turn power off and use a torch .
Thanks again Roger .

Hi Ron , Just reached round to the back and pressed the service switch and have a Click , not sure if I know how to see the needle to your question (Is the needle in the "end of record" position ??) . Got this last year from someone ( Harry Patterson )who sells them all the time and would ...

Hi Ron , Yes I meant Reject button and not reset button at the back ,the Reject button has worked before ,the power switch at the rear is switched on just lifted to top to look at the record selector and it has a record selected in it but no doing anything , as you say possible jammed . I'm wonderin...

Hi Ron , Tryed what you said about tapping on the relay , first I switched on with the juke box back switch no movement on scanning , tapped the relay still not moving pressed the added free play button on the side and selected a record , still no movement . It is now not selecting at all . Strange ...

Ron,
Thanks again , will try tomorrow in the morning , let you know later . Roger.

Hi Roger, OK-that sounds correct, and Code C is the last version of the SCC--try the following: Carefully slide the SCC forward till you can see the relay on the inside--then start the mechanism scanning, and tap on the insulated portion of the relay to close the points--Let me know what happens--R...

Hi Roger, I am confused-- The RCA plug MUST have the shield ( or sometimes called "braid") --AND--a small colored wire, SOLDERED to the outside of that plug -- Do you have a meter ? If so measure the tip to ground of that plug and let me know what it reads-- The "Code" I need wi...

Hi Roger, OK--take a good look at that plug--it SHOULD have a shield, AND, a small (usually,but not always, green) wire soldered to the outside. Your symptoms indicate that one or more of those wires is open-- Another thing you might check is the SCC--which "code" is it ?? Ron Rich Re: 19...

Hi Ron , Thanks for new info , looked a plug hard to tell but seems to as you say wire soldered to the outside and one to the center looks like green is in the center and other soldered on the outside , center seems not to touch anything same as outer wire. But because of it's age not to much kinda ...

Hi again Ron , Just tryed as you said pulled out the Tormat Memory Unit Input Plug from the Solid State Control Center, seemed to be tight but tighten a bit more and replaced , still selecting records on it's own they are going backwards in order when selecting . are there any other things I can try...

Hi Ron ,
Thanks for that info I will try at the weekend , I was told by the person I got this from last year that you were the man for Seeburg jukebox's
that's if I remembered your name right .
Once again a BIG Thanks Roger Cambridge UK