Hi Ron & Rob. Many thanks guys for your replies. You have been a great help. Looks like my manual is incomplete. So thank you Rob for taking time out to find the schematic for my stepper. I'll take the stepper to my repair man to check out before I connect up to my juke. Will let you know how it...

Hi Ron,
Many thanks for your reply.
I'm struggling to find a schematic for either the RCSU4 or 5.
I've got the manuals but they don't go into detail regarding the schematic for the stepper.
Do you know where I can buy / get a schematic? Any help would be greatly appreciated.
Rich

Hi Guys, I've been looking for a schematic for my RCSU4-H5 stepper unit, can't find one anywhere? Has anyone got one? Or can I use the RCSU5 schematic? Reason being that some one has cut through two of the caps? And they don't look like to be original, maybe someone's made a modification. Thanks in ...

Hi Rob, Many thanks for your reply. My LPC480 is working well now with your's and Ron's help last year :D . Took me some 7 months to repair. The RCSU4 I have has the red trans and the unit is marked RCSU4-H5 235 Volts. So guess it is ok to hookup my SC1 wallbox, but will have the guy who recapped my...

Hi Guys, I'm a little confused? I've a Seeburg 480LPC Juke and would like to add a SC1 Wallbox. In the manual it says to use a RCSU5 stepper but the wallbox manual suggests the use of an RCSU4 stepper? I've bought a SC1 wallbox. And have also bought a RCSU4-H5 235 volt. I'm unsure if the RCSU4 is th...

Ron
Couldn't have done it with out you!
Many thanks again.
Rich
Newquay Cornwall UK

Hi Ron & Rob, Just wanted to say many thanks for all your help! My Seeburg 480 Juke is now rockin n Rollin! i adjusted all the timeing and mech switches with the help of Ron Rich's manual. and had the resistors R511,518 and 519 replaced(many thanks Rob) and broken wire was found at the junction ...

Hi Ron, BOOM! only joking.I did have a look at the schematic and decied not to connect. Many thanks for your advise could have been very costly, will connect the reject button to the white terminals tommorrow. Let you know how it go's. I've ordered a NOS GEC 6x4 tube and will get the 3 resistors in ...

Hi Ron, Thanks for your reply :D Checked the 15amp fuse in the TCC1 and has tested good. Also checked the 3 pin plug on the TCC ref the reject button inop (j514 socket on TCC) there is two wires connected to the plug either side and the middle one is empty. Another white and black wire in the same l...

Hi Ron & Rob Many thanks for your advise and guidnace. I will remove the TCC ( not up to getting thrown acrossed the floor by big voltages!thanks for the advise Ron) and get the R529 (56k-ohm resistor), R519 (2.7k) and the R511 (3,3k) ( thanks Rob for your advise) and get them replaced by the gu...

Hi Ron,
many thanks for your reply,
The console number is ELPC480 07 290 H5
Rich

Hi Guys, Many thanks again for your replys and advise. When I got the phono in January it did work ( selecting records ect) at that point I knew little about the workings of the phono but guess the 0a2 tubes were working / glowing then.After about a day or so the autospeed unit stopped followed by t...

Hi Rich & Alan Many thanks for your replys and sorry for my late reply. I have checked the wires on the contact block ( aka Frog) and all they read continutity. I have had a pro recapp the amp and the Tcc as I know little / nothing about capictors. I've noticed when the juke is cold after scanin...

Hi Ron, Many thanks for your reply. The console number is ELPC480 07 290 H5 When it scans I can manualy trip it and it will play the record. But I do think I need go away and to research my juke box further and read the schematics.It was an ebay purchase :( and was couriered here laid on it's back o...

Hi Guys, I'm a real newbie at jukebox's. I've got a seeburg 480 lpc thats scanning twice. I've got an read the manuals but am a little baffled! When it's scaning i've no glow or flicker from the 0a2 tubes? could this be a weak/shorted 6x4 tube? it was working.but since I've recapped the auto speed u...