last statement was on wrong see burg.

i have no scan when using test on receiver plug pin 15. service switch does start scan. changed scan board to no effect.

i reversed the plug wires and lo and behold the machine works great now...............did not think i would ever get it up...

do not know brand of plug, it is the original 1967 plug. i will try to reverse the wires monday. got to take a day off . working on a 1957 see burg 100jl, wurlitzer 3700, see burg ls315, a rowe saturn 2, and a NSM 240 I. also picking up a NSM Grand Preformer thursday.

if ry6 is energized by the reversing switch, then the switch is good. it energizes when the switch is made. i did have a problem with the motor plug where two wires came out and i desoldered them. could they be backwards? they are yellow and black, i can't tell from the print...

yes the crank arm hits on the pin and does not reverse and lift arms lift and do bind on the record rack.

I have corrected the selection problems i had, found keyboard wiring incorrect, and programming plug jumper was open. does select correctly and correct selector pins come up. record holder does spin to search but stops on pin and motor hums , i turn it off to prevent it from burning up. adjusted sto...

i found that the CD-PRO motor was bad. replacing unit

reset ccc to default conditions. set to free play. ccc shows no errors, unit loads CD but does not spin CD. replaced mech control unit, no change. checked all plugs, replaced CD-Pro player with known good player(old player was CDM-12), no change in symptoms. still no errors on ccc.

i have a rowe cd100j with error codes 05-53 and 05-63. the mech loads but does not spin the cd. had cd-pro rebuilt and tested. any help would be nice.

looking for pilllar light motors for rowe cd100f

looking for a hing assembly which has glass "WURLITZER" "STEROPHONIC" . I only need the pot metal assembly. these historically crack.

to program ES5 NSM for free play and to play entire CD selected (this is for a NSM ES5, most ES5's were updated to ES 5.1. This was a free update. Programming for ES 5.1 is different) PROGRAMMING FOR FULL CD PLAY AND NEW CD ADDED 1. AFTER LOADING ALL CD TITLES AND ALL CD'S IN CD TRAYS YOU MUST TEACH...

I found tat the Timeing board is not correct. rebuilding it.

the BOTTOM speakers are 8 inch and are fake speakers. they just act as a sounding board, but you can put real speakers in ,just follow the manual for hookup. it will sound better. the weakest part on these units is the amps. replace the caps . the carriage assembly has a sensor that detects light/da...

buy foam replacement to nearest over size, cut to fit and glue with speaker glue or rubber cement. will last 20 years,,,,,