Hi Ron
Thanks for all your help. I found the problem, old age and bad eye sight.........I was looking at the wrong pin. Got it all adjusted today, hopefully it will work right.

Thanks Again
Bob

Thank you Ron For some reason when I go through the clutch adjustment procedure and when I get to Clutch 4, clutch play position adjustment, my clutch is not below the worm pin and I cant get the 1/64" clearance between the bottom of the worm pin and top of clutch. I thought that the clutch shi...

Hi Ron
What is the brake cam? I see no references to that in my manual.
Thanks
Bob

How far down in the play notch should the roller be when record is playing? How far down should the roller be in the scan notch when scanning. My roller only seems to go into play notch about half way.
Thanks
Bob

Does anyone know where I can get the edging and pads for the spoons that hold the glass tubes also the discs that go in the bottom holes for the glass tubes.

Thanks
Bob

Thank You Ron.

Sorry Ronnnnn

SEEBURG M100C.

What do I use to hold in the side and program glass in the frames?
Thanks
Bob

Hi Ron
Would you know the type of wood the vinyl was suppose to represent?
Thanks
Bob

I am in the process of restoring a Seeburg m100c and would like to know how to get the animation piller plastic panels out. Any help will be appreciated.
Thanks
Bob

Hi Rob It does it with all records on the CCW side. You can notice it in the back ground music more than the main singing or what ever. I set the needle pressure with a gauge so both side are the same. There is clearance between the cartridge and record. This is the third different type of cartridge...

Rob
Checked all. Cant find a problem with any of that. Seems if it was a clamping problem it would affect both sides. ???
I am new to this so I don't really know.
Thanks
Bob

Thanks for the reply.
I will check these thins out.

Bob

http://www.fileconvoy.com/dfl.php?id=gf ... b69f20e32d

Let me know if it works.

Thanks
Bob

Hi Ron

Not sure what I am looking for. Sending pictures again. Motor has no place to oil it and is saturated inside.

Thanks
Bob