Thanks Ron!!

They were brand new and I checked continuity before putting them in. So I just checked for mistakes on wiring. One thing that I just noticed when looking for parts is that the delay rings on my magazine motor relay are opposite how they appear here: https://www.jukebox-revival.eu/staging/jukebox-par...

Back from my trip. Okay I've checked the cam and it seems to be properly adjusted. I tried manually switching the interlock relay and no go, it resets back to where it was. I looked at the micro switches and couldn't find anything that looked wrong. What I did find though is that the magazine relay ...

Great replies thanks. I will try all of them once I get back from vacation. Pretty much running out the door right now. One question. I saw that there is a selenium rectifier in the control box, its so old that I could only find it listed as an antique. It was in black plastic so I didnt recognize i...

Well Im sorry to say that it wasn't the micro switches. I put them in and it cleared some other things up, notably minor problems with the write in side of things. But not the problem Im having. Im a bit stumped. There seems to be something that keeps the trip coil charged after the record has been ...

Thanks for the info. Its looking like the microswitches are the problem at this point. Though they seem to be adjusted properly for the cams and they click, a continuity test indicates problems with the switches. After I tried cleaning them it only got worse, so I've ordered a new set. The machine h...

Thanks for your quick responses. I do have the service manual, though I've had a tough time going through it. The interlock relay is in the control box just underneath the record platter. When I push down on the micro switch it does release the trip coil but doesn't disconnect the power. As soon as ...

Im having problems getting the trip coil to release on my interlock relay in my Rockola 425. After the record is placed on the platter the selector lever cancel solenoid turns on but never turns off unless I do it manually. The release coil seems to work properly but the trip coil stays energized an...