im in need of a manual or any info on a NSM PERFORMER WALL??? 100 CD wall mount box, i just picked it up cant get it to take bills or add credits is there a way to st it ti free play to try iyt out i thnk it has a error code of po41 any ideas?
thanks

OK THANKS

once again im not there to look at it, but i do seem to remember a white multi-pin plug that has a couple white wires that looped around to its self,,.. i guess that could be the jumper you speak of.? if so i will try fliping it over and see what i have..any idea what terminals should be looped toge...

hi ron
could you expand on what this jumper should be on the amp? whats it look like? and where should it be?

HI RON I just picked up both of these boxes within the last two weeks the r84 only played full blast when i got it, the volume control seems to be the original, but i may swap that from the r86 as a test. i will double ck that shorting bar tonight to make sure its not on dual. you ask...<is the corr...

Hi Ron.. I got the bulbs you recomended #2182D I soldered one lead of each together in series and then the remaining leads in each of the spots where the originals had been. as far as the volume control jumper, i believe it is set corectly, you are talking about where the 2 volume leads connect on t...

ok i did get some bulbs localy and soldered them to the pcb, no change really controling the volume but after checking closer it seems like the vol. knob is acting more so like a balance switch, or a i did some adjusting of speaker wire mountin and was able to get irt so it want quite so loud any id...

Thanks Alan

ANY IDEAS?
thanks

thanks Ron and Alan Ron i am in wisconsin, i had been to the local radio shack type store and they were asking what watt the 2182's were and i wasnt sure. i work in the automotive field, and have access to some differant bulbs, so do you think if i find something in the 24-28 volt range that they wo...

Ron... Why two bulbs in a series? why not just one 2182? So far i havent been able to find anyone local that carries the 2182's but wil keep looking

Ok Ron thanks
i was wondering about sodering first. So is the glue to guard against vibration or something? Do you know why they would use a light bulb for this? or what the bulb does?

thanks Ron the follow up i seen was by someone saying that he was told by a long time AMI repair tech that they in thier shop used the mini xmas lighs (removed from thier sockets and then glued to the board). im not sure if that was on this message board or elsewhere? i think it was by jukeman?? wha...

Hello Im a newbie here and with jukeboxes please help. I recently picked up a R-84 juke that the volume plays only wide open. tests in the manuel/catalog indicate to replace the preamp board. internet searches led me to several message boards indicating the problem could be 2 light bulbs on the prea...