Thanks a bunch, Jim. Dammit, I searched that part number on two different browsers at home, both of which have Google as default search, and nothing like it ever showed up. Now I run it at work and Digikey is the first thing that pops up. Appreciate the help.

Haven't had a chance to call VG and could look through their parts forever without a part number. Have checked several websites for parts with no luck. Here's the photobucket link. There's no icon below the text of my last post?? It shows up on my other computer. http://s19.photobucket.com/user/Doug...

Pics are in photobucket, but can't get them to show up here. EDIT: ok, click on the icon and select open in new tab and the images show up. Manual has no part number, block diagram shows the power switch assembly only as "corcom". The unit is the size of a cigarette pack, contains a fuse (...

The moving part of this switch is totally smoked and in pieces. Any chance of a replacement for the entire assembly, repair, or reengineering? Thanks

Never mind, I answered my own question by comparing the two cables. If you hold the ends of the phone cable together like a mirror image, the wire colors are also a mirror image. Black faces black, red faces red, etc. Hold the juke cable ends together and the wires are reversed 180 degrees. Thanks t...

Uses what appears to be a common 4 wire telephone cable to connect the keyboard to the computer. The plastic tab that locks the end connector in place had become weak to the point that it was losing connection at the keyboard and the display would go out. So, I installed what appeared to be an ident...

Swapped the eprom from a model B CCC into the H model CCC and cured the problem. The B eprom was a version 3.9, the H had no tag, so there is apparently no major difference. fwiw, the B board had the same battery. It's a 1/2 AA, rated at 3.6 volts. I think i said previously that it was ni-cad, but i...

Thanks for the speedy replies. I will post the version number, might take me a few days. Battery voltage was 3.8 with CCC removed from the juke, obviously not the original battery, so that could be the problem, it's one of those cylindrical purple-striped ni-cads with axial leads. I did the reset as...

CD 100H was constantly resetting as if power was being interrupted. Jiggling service switch seemed to be the cause, so I dismantled and cleaned it. Still had the problem, but after some more jiggling it started working and playing normally. Several hours later it was not working again, now showing b...