Hi Rob & Rich. Tech guy found a pin partly open on the pin bank. He closed the pin and the carriage stopped scanning. Working fine now, thanks for the help. Preston--Syracuse NY.

Hi Rich & Rob, My carriage scans back and forth after playing a record. It will stop and play the record selected, but continues to scan until I select another record. Preston--Syracuse NY.

Hi Rob, That message was meant for you, sorry Ron. Preston

Hi Ron, I would appreciate that schematic if you can, thanks for your help. Preston--Syracuse NY.

Hi Ron & Rob, The middle switch will not rotate the drum unless I hold it down. The other four switches are working fine. Also I think Rob in a past issue on the forum, discussed with someone about converting to a 24 Vac relay in place of the drum switches. I may have this wrong, but I thought I...

Hi Ron, Thanks for the info.. Preston --Syracuse NY.

Hi Rob & Ron, I will admit I confused you by using the word engaged & the statement about the detent lever. I was going to give you more information but I was unable to get back to you on your numerous responses. Rob to answer your basics questions, the tubes, lights, all were lit, all the f...

Hi Rob & Ron, I switched the 2d21 tubes as you suggested and nothing changed. The record is on the flywheel and while pushing the detent lever the turntable hardly moved, & the record didn't reject. I receive no credits when pressing the wall box & juke box buttons & they don't lock ...

Hi Rob, I checked the 2d21 tubes they are all fine. I use a remote hand switch for volume & reject. The reject doesn"t work now.

Hi Friends, My Seeburg V200 was playing just fine until today. When the record finished playing it failed to return to the magazine. I tried to reject the record with negative results. The carriage motor is still running and I'm unable to engage any buttons from the juke box or wall box. Your help p...

Hi Ron, I put some oil on the credit wheel I think i'm good now. However I'm nut sure about the cooper plug you wanted installed in the stop. Thanks, Preston

Hi Ron, I think it is coming from the credit unit. Preston --- Syracuse NY

Hi, The issue is a quick clicking noise (approx.3 seconds) when making any number/letter selections. After selecting 3 or 4 records the clicking noise stops. Your help please. Preston--Syracuse NY

Hi friends, I'm submitting this question for a friend, so if more information is needed, I will respond back. He is attempting to fix a selection issue. The the #2 will not respond when selected, and #3 comes up when #5 is selected. He says the asm seems ok and he has tried the gray and black boxes....

Hi Ron, No drugs here Ron. When the selections are made the pins are not pulled. However when k-0 is selected, that's works fine and all the selections after work as well. ---Preston---