Ron it seems to be dirt in the push buttons and found a bad ground on the pinbank do you know of a easy way to clean the push button contacts. Thanks and I think I'm going to have to go into the pinbank and clean it it's very dirty

Hi Ron first I just want to say thank you I've got it to scan the safety switch was sticking that was causing the repeat play got that . Just can't get it to make a selection using the ES I still have to move the pins by hand ccu resets 2 fuse is good my head hurts is there anything I can try

Should I rebuild the pinbank?

I have checked all grounds it's like it's stuck in play mode and when I add credit the select light is on and when I make 6 selections the light goes out and when I make a selection nothing happens to the pin bank

When I put a coin in make a selection hear a click from the back and it will not scan or raise the pin in the pin bank but when I move one of the pins in the pin bank say a1 the record arm will raise up and play a record at the other end the mech will not move to the pin that I have raised. I have c...

Does anyone have a free download for service manual for seeburg trashcan jukebox thanks for your help.

I am in need of a ami pulse converter cover. For a 1959 ami J Cover only if you have one or know where I can get one please let me know. Thanks for all your help guys.

i reset my push pin by removing fuse in bottom of cabinet and hit the pulse relay both contacts. this is a1 and i turned the big wheel on the pulse converter counter clock wise until sprag relay energies . cut power to juke put wedge to hold the sprag armature down. loosened the pinpusher on the bac...

When I push a1 the jukebox picks up a11. When I push a11 it picks up a1. If I push a3 it picks up a11most of the a selections pick up a11. So I tried b1 it picked up b11 and when I pushed b11 it picked up b1. Is there a adjustment to correct this issue thanks terry

I have a 1959 ami 200 j . When I make a selection it plays the wrong record .then it puts it back in the rack then it plays the one next to it and after it puts it back and no other selection made it keeps scanning for another record and want stop scanning and the turn table keeps turning it just wa...