Don't bother replying folks - I see how it's done! The AMI logo is on a separate plate which pushes out revealing two remaining screws holding the chrome frame. The plates were 'gunged up' in the frames and gave the outward appearance of one complete unit.

I'm stripping down an AMI model K - but how best to remove the large oblong shaped 'AMI' nameplate castings on either side? One screw is visible and easily removed, this then allows the nameplate casting to pivot on a second screw, but this one appears to be completely buried behind a substantial sc...

For anyone who's interested in what it was: I noticed that when any '6' was selected, the stepper received an extra pulse (making '7') which coincided with the button bank reset bar being actuated. When I turned the pulse generator by hand I discovered the outer wiper blade was not quite clearing th...

I recently rebuilt an AMI model 'i' 120 electric select. I went through the mech carefully setting up as per the manual and everything works fine apart from one fault: whenever '6' is selected (with any letter), '7' is played - e.g. select B6 you get B7, select E6 you get E7 and so on. All other sel...