Not operating for profit, I have cash door off and a stack of quarters for people to recycle through.

When I say airport I don't mean a passenger terminal rather I have it in the back room on the FBO I work at.

We deal with aircraft owners, hangar bums, and the private jet type.

Finally got it done, I could not be happier!!! I can switch out the pictures, change the look, It is located at an airport right now so that is why all the pics are aviation related. Thank you everyone for your help!!! Rob-NYC, I plan on doing some or all of you recommendations when I get a chance, ...

Success!!

So I re-cleaned the wire bundle connectors and low and behold it works now!!

Ok, so I pretty much have it back together and it it working perfectly except it will not play side B at all, the write in arm moves into position and then nothing I can hear relays clicking and it subtracts credit but the coil does not fire and from what I can tell it is not getting any power. The ...

Wow, that is some great advice Here is a pic of the speaker in question. Do you think it can be patched? http://i669.photobucket.com/albums/vv53/sharab85/IMG_4620_zpsw4uag5eq.jpg I will diffidently try your suggestions, do you have any tips for adding crossover and tweeter? I am not very electronic ...

Ok, so I am almost done with my restore but while inspecting the speakers I managed to put my thumb thru one of the woofer cones :evil:. I am now looking for a replacement set, what should I look for as far as pairing them with the amp? The amp is the Monaural 50335-A. Thanks in advance!!! Shawn

well I have started the disassembly so wish me luck!

Did Rockola put out an users manual for this jukebox, I can not seem to find even a reference to one anywhere.

I have the service and parts manual but a users manual would be very helpful.

Thanks again,

Shawn

Do I need to remove the old dried on oil with some form of degreaser like gum out before re-oiling everything?

Thanks,

Shawn

Hello, I recently picked up a non-working rockola 461 for cheap and was able to get it working fairly easily , I thinks that grab arm was in a bind from being transported on its back by previous owner. My goal for this is to be a usable jukebox that I would not be embarrassed to have in my house. It...