Thank you for the reply Ron. Sounds like a big hassle to get new contacts on those detent switch blades. It's on my To Do list. In the mean time I'm ready to spin some records! Everything on the mech (Favorites counter, magazine, frame etc etc etc) was dusty/dirty/old greezy that I spent the whole d...

I agree Ken, thanks for the heads up. I will be servicing the mechanism next. Question. My detent switch is pretty burnt, not very much contacts are left. I have new contacts on hand which are designed for use in electromechanical pinball machines. One type is a silver alloy- gold flashed and design...

WOW THANK YOU VERY MUCH FOR THE HELP !!!!!! :P :P I took the time to map out the component connections on the controller and identify bad resistors and build a shopping list. I replaced 6 resistors, 3 of them were completely open. I also replaced all the Litic/Paper caps. I put it back together and...

I just made some up in Photoshop and printed them out, they look great. Someday I wil have them reprinted on shiny card stock at a printing office.

Wow thank you both very much for your replies. Please let me address them point to point. Hi Rob: *Thank you Rob for the simplified read diagram. That helps a lot! *Good to know my Tormat Memory is probably alright. *I rebuilt the plunger block yesterday. I removed it from the machine, cleaned out t...

Have anyone ever come across a bad Tormat memory unit? I notice the one I have sparks A and B to the next contact as it's scanning if its position is not adjusted right. Can I assume the -150 and -450 is probably alright? I know it should NOT be adjusted so it sparks, but it should go as the manual ...

Thank you Ron. I have worked on this jukebox all day today. I got the selector unit all together, adjusted and put back into the machine and did some general cleaning. This is followed by placing the negative end of a standard battery (AA-C-D) against the chassis and touching the tip of the pulse ma...

Ok, about the jukebox. The immediate problem I need to resolve is record selection. I can put credits on the machine and it selects normally but the mech scans twice and stops without picking up a record. I followed the troubleshooting guide. I unplugged the Tormat RCA connector from the Pulse ampli...

Hello thanks for allowing me in your community. I am Steve from Georgia USA. I worked in a large arcade refurbish shop (Lieberman Music Co, Bloomington,MN) in the 1970's-80's rebuilding traded in money changers, vending machines and games. I was always interested in the jukebox shop but I never made...