I can see it go towards the record bin while I turn it but it doesn't make it over all the way. If I turn opposite it just goes back to the platter.
Will try some grease on it and see if that unsticks it.

Thanks
Scott

Fuse in back seems ok too, as do the fuses on the main control board.

Ok so I found the little shaft and rotate it but it locks up at the point pictured below, not quite over the record bin.
I tried turning it on again and it just returned to the table and wouldnt function.
Should I get a pliers and force it to turn more?



Thanks
Scott

Hi clones thanks for the reply Tried the cancel switch doesnt seem to be triggering anything at the base of the tonearm. While in Operate mode the platter keeps spinng. Gripper arm is directly over the turntable (see attached photo). Tried pushing the gripper arm motor both ways from the gripper arm...

Hi all, My Rock-O-La 488 was working perfectly but now is currently stuck with the turntable spinning and the arm not going to pick up the next record. The tonearm can be manually moved back and forth but it doesnt stop the table from spinning or engage the next record. Placing the machine in SCAN m...