Have had a chance to have a quick look before I leave. 3M1 is open during play and closed when carriage scans and is at rest. It closes briefly when rejecting and resuming the same disc.

The relay, from what you have written is NOT doing the right thing--- It is indicating that either the 3M-1 contacts are not "making", or "opening" , or the "relay hold" contacts are not making/breaking. Did you clean/analog meter check, them ( read above sticky post o...

Sure--the 24 vdc relay can be "adjusted"-- The 12 vdc relay may be used in the DCC, if you add a 150 ohm, 2 W.ww, in series with the coil +27vdc supply. ( If you have a DCC -2 Code B, or any DCC-3, this was done as they used 12 vdc relays). Did you watch the relay operate--what did it do-...

Sure--the 24 vdc relay can be "adjusted"-- The 12 vdc relay may be used in the DCC, if you add a 150 ohm, 2 W.ww, in series with the coil +27vdc supply. ( If you have a DCC -2 Code B, or any DCC-3, this was done as they used 12 vdc relays). Did you watch the relay operate--what did it do-...

Hi, and thanks for purchasing my Guide ! (I do sell/ship it directly, world-wide). A 24 not 12 volt dc relay must be used in the amp. Since it is on continuously, a 12 volt unit will likely catch fire ! Also--the amp relay MUST be "adjusted" as per my Seeburg Trouble Shooting Guide amp no...

First post here, so please be gentle. I've been having issues with my mardi gras for years now and must admit to having got close to giving up. I live in the UK, but was on vacation in the US, so had Ron's troubleshooting guide, an amp cap kit, new needles as well as some other parts from a guy in I...