Good evening Gentleman. so.. after running this jukebox at 90% for the past couple years.. I finally decided to start dabbling with the amp since it has one dead channel... disassembled the entire thing and DeOxed brushed & cleaned it up, also checked fuses (all good) Sadly after reassembly I re...

thank you to both of you

More than possibly I am not understanding what the "Latch bar solenoid" is And unfortunately just now when I plugged It in to take a video the darn thing is working fine again, with any luck it wont happen again (but not holding my breath) if it fails again I will immediately take the vide...

No latch bar solenoid engagement, it just ignores my selection altogether and pops back out with no delay.... (I will make a little video with sound tonight), pricing has been set to FREE PLAY since I figured how and has never changed.

Good evening Gentleman. After a month or so of perfect operation today Our jukebox began displaying a peculiar behavior, if you press any key on the keyboard in the second row (From L to V) it pops out immediately thus refusing to acknowledge that key as part of the selection, any other key in row 1...

Thank you all for all your Help.

Yes practically Location Ready.. fortunately the Location is right where it stands (In my living room) and there will be no beer incidents.

Installation of new Custom made decals

Weekend Update.

* Motors n Gears Oiled
* Driver belts for selection Mechanism Replaced
* Record Index Tags updated with new versions

NEWER INDEX CARD UPDATE LOWER DOWN

Good Morning Gentleman. The deals are definitely there, with a little luck and good judgment. We purchased ours through Craigslist, and could afford it only because the previous owners wife wanted it GONE, I offered him 1/3 of what he was asking and he said "Yes" otherwise we wouldn't have...

Yes Sir. I'm on it.

Thank you for your words of encouragement Rob. After noticing one of the Motors on the selection mechanism was humming and hot. and examining carefully I realized it uses to two rubber belts (same size) to drive the gear system that activates the relays for selection. One of these belts had slipped ...

Well.... Today I went to test the jukebox and the entire Selection mechanism is dead again. I hope it's simply the spring in the Keyboard Mechanism Relay again... but am quite disheartened and will wait a couple hours before I dismantle again. both letter and Number button go and stay in but nothing...

Last night we re-built the top Latch system as the original barrel lock had been drilled out by previous owner. Sadly by a gross miscalculation on my behalf, I didn't notice the wire pullers had been "mickey moused" by someone before me, and once I had the whole thing assembled and I close...

I believe Tony is speaking of the wire retainers, Rowe used, as being brittle --Sure,Tony, If I am correct, replace them all, but use black colored ones, and they will last ten times longer- Ron Rich

This is correct Ron, the plastic holders that help route the cables around the cabinet.

Thank you.