Hi Ron, Rob & Ken

Just to let you know I have the wallbox now fully setup and it works perfectly. I wanted to sincerely thank each of you for your support in enabling me to achieve this result.

Best rgds

Wayne

Thks Rob-much appreciated. In that case I will not ground. The mains source has active and neutral inputs which are not changeable. Well my wallbox and player system arrives next week and I am really looking forward to linking it all. I trust I do not have too much difficulty with the player system ...

Hi Rob-Just one more question pls. Does the wallbox need to be grounded through the main power source? Thks & rgds Wayne

Thks so much Rob. Sorry for not expressing precisely. The rocker switch with light I wish to use on the 240v side which you indicate. It has x3 terminals. I am assuming x2 are for switching the active input and x1 is to ground the light-is that correct? Thks for confirming fuse on the 240V side-agai...

Hi All I have now received the transformer from Jaycar and purchased a housing. Following Kens' recom re installing a fuse I wanted to clarify the appropriate wiring configuration. Sorry for my naivety on this issue. If it was simply a matter of connecting a 240v plug and cord to the transformer and...

Thks again Rob. Yep its absolutely amazing what people, who should no better, do! What always worries me with these type of characters is that what you can see you can agonise over and correct but it is what is not apparent that they have done which is often the real issue. I have a really important...

Thks Ron. Yes I ordered the transformer from Jaycar yesterday. My wallbox also left Florida yesterday & I ordered the Player System for Wallbox Selectors. Based on Kens advice I have also ordered a metal housing in which I will include switch and inline fuse. Once I receive the components I gues...

Thks Rob for that advice. Erwin Boot Flamrecs has been in touch with me and suggested I access our local electronics retailer Jaycar at which I have identified the following transformer 240VAC to 24VAC 3 amp: http://www.jaycar.com.au/productView.asp?ID=MM2012 Would you mind confirming that one is ok...

For info Ron I am awaiting clarification from Erwin on the availability of a suitable transformer and I have corresponded with Ken-a fellow pinballer!. Acquiring from the US is no problem for me.In fact most all of my pinball needs (including the last 5 machines) I have accessed from the US. I have ...

Tremendous advice Rob-thks so much-Wayne

Thks Rob. I only propose running one 100 wallbox from the transformer. When you refer to original transformer I take it these were not supplied with the original wallbox but available as an extra?? Thks Wayne

Thks so much Ron for your most responsive & informative reply. Wayne

I have purchased A Seeburg 100 music wallbox to set up in my pinball games room using the Data Sync "Player System for Wallbox Selectors". I understand this will require a transformer to provide power to the wallbox and Data Sync have nominated Radio Shack transformer 273 1512. On the othe...