What do you mean by ES system? How would I check?

Supposedly the component at IC3 is the battery-Dallas chip in question

I am working on a NSM Performer grand that is giving a battery error code, I can't find a source for a replacement battery (loks like a chip really) So I may have to replace the control unit. This particular one is marked as a 206631B. I found one that looks just like it but it is a 206631C, will th...

New cartridge, works like a charm now and sounds awesome!

Thanks guys!

Looks as if I may have a bad keyboard according to the troubleshooting section about the flashing re set and re select

Did you mean DES and not TES?

Here are the pics of the tone arm and the cartridge that was in the juke.

Ok I think I may gave found the problem. The small spot weld that holds the cartridge to the small bracket that the screws to the tone arm was very loose and now has broken. Can someone tell me where I can buy a new cartridge/stylus assembly that includes the attached bracket? I will include some pi...

I've adjusted the tone arm to the best of my abilities according to the service manual but still it will not advance forward in the record, it just stays in place. If I manually advance the tone arm forward, it just slides back to the starting edge of the record backwards. Could the position of the ...

Now the "please re select" light is flashing. If I press the reset button on the keyboard, it goes off for a moment then comes right back on and continues to flash please re select. It won't let me enter any digits for selection. I read in the troubleshooting guide that I got from Ron that...

Thanks again for the info, I d have the service manual so I will follow the instructions on how to adjust the tone arm assembly. The jukebox was playing just fine when I went to pick it up and bring it home. I had to drive @ 80 miles to bring it back home so I guess the ride may have jarred the one ...

Thank you for responding, I will check for the tone arm adjustments. Do you know if this jukebox can be set up for free play and can I add external outdoor speakers to it?

Thanks,

David

Just picked up another 70s juke and after the record selects and the tone arm moves to the record, it will not play the record, it basically just stays where the tone arm starts on the outside edge. When I move the tone arm over a bit to the grooves of the record, it still won't play, just moves bac...

Mainly, what would cause the tube I am pointing to to arc/flash and what would cause the other component I'm pointing to, to get hot? I probably just need to send the amp to Bill Bickers to have him rebuild it.

Began working on another jukebox that belongs to a man whose pinball machine I repaired. It is a Rock Ola 1478 and the amp looks to be in poor condition. I have never worked on a juke that has tubes, but it looks to me that most of the ones on this one are bad. When the carousel is turning to select...