Hello Rob,

Ah yes, I do not have the speaker plug in. I'm working on the selector box and amp at a separate location from the juke. I'll have to take them over and plug it in to see what happens.

Thanks again for all your help!

Best Regards,

Michael, if this is a SHFA-1 check: -Is the 5U4 lit? -Is the fuse OK/ -Do you have voltage at pin 2 on the 5U4? If so, check both ends of the choke. Given that you just rebuilt it there is probably a connection missing or wrongly placed. Schematics: http://www.verntisdale.com/Seeburgschem.htm Rob H...

Hello Forum, I have just revamped the amplifier in my Seeburg 220. However, when I plug it in, I am not getting the right output on one of the test points (Pin #4 on J105). Pin #4 on J105 is supposed to be +365V, but I am basically reading 0V. Pins #2 and #3 test ok at -22V and -35V, but Pin #4 is j...

Wow, Rob, that's really great info.

Thank you very much.

Michael

Norman, Thank you for the welcome and the reply. Yes, I will be replacing both speakers either by (1) reconing or (2) buying two new speakers. The cone material is aged and fragile, so my goal is to replace both speakers by either method. I saw that reconing kits are almost as much as new speakers. ...

Hello! My name is Michael and this is my first post to this forum, so thank you to the hosts. I am currently restoring a Seeburg 220, and the cone on one of the cabinet speakers is shredded. I have three questions regarding these cabinet speakers: (1) Is there a good, modern replacement speaker out ...