I did get this up and running. Just a short in the wire. Now, my wheel will not accuratly stop to pick up the records. The videos I have seen the wheel stops on a dime. Mines has about 1/4" of leeway the wheel can move. Something I can tighten so it wont jiggle? I am going to take out the mechs...

Well, without the manual this maybe hard. I did however get it selecting the right record. I'm a little mad I bought this at the price I did. I paid high so I didn't have to do this work. Thanks for all your feedback and I will help log the issue for future owners to help resolve.

Danny

Ok, the "mag Adjustment and LED light on the computer control module. FYI I have unhooked all coin mech stuff from the unit. Could that be an issue?

Here is the link. My other video will upload shortly. If you need more video let me know.

http://youtu.be/cZeF5oZP4M8

Hello Dantebean, Welcome to the forum. Nicknames are great but we do like the use of proper names on this forum. I concur with Ron that you need to check the wiring looms for connection issues on connection pins and for cold joints on the boards including the pricing board (the long board with the ...

Thanks Ron, I will get it put back together once parts are here and check that LED.

Also, it will return the record and needle when i turn the switch to service. The cancel/reset button on the turntable unit doesn't work. Short?

I just purchased my first Jukebox and having an issue. It did work fine for a bit but then..... It picks a record, plays it through, then at the end it will not return the needle and return the record. Once the needle activates the optic I hear a click but nothing. I have the turntable and wheel uni...