Wurlitzer 7500 Jukebox

Just brought a Wurlitzer 7500 I checked the above sources and none says which manual also applies to the 7500 VG has just the schematic but does not say which shop manual appplies. Any ideas? Thank you Norman

If I am correct--the 7500 was made for several years ( I have seen different components installed in them)--I would look at what's installed, and take the manual that is the closest--mechs are all pretty much the same from 3400 up--Ron Rich

Thank you Ron, will look into it.

I have two 7500 machines (one works, one doesn't) and most of the guts from a third 7500 machine. If you need parts, let me know, I may have what you need.

BTW - the manual that you need is the 3600 manual. It has a blue and white cover. Don't buy any of the copies or knock-off manuals which claim to be 3600 manuals. They are usually worthless (learned myself). I found one on eBay and it has helped me out tremendously.

Thanks, Bill

Bill Thank you for the heads up on the manuals will get one from Alwaysjukin. also thanks for the offer about spares, Where are you at? If the board wont allow you to answer that, let me know and I'll message you. again Thank you Norman

Norman, I'm not all that far from you. I see you are in VA. I'm in Charleston, WV. See the info boxes to the right of the posts, it will show you where people are from. Just let me know if you have any questions or need a part. Thanks - Bill

Ok Bill thank you will get back to you later if I need something. Norman

Norman, just saw this on eBay. This is the manual you want to buy for your machine. I have this manual and it is extremely helpful.

http://www.ebay.com/itm/Wurlitzer-Phono ... 6016.l4276

Thanks Bill Just got a book from a friend of mine. It is the AMR reprint. which i think is the same thing. The Ebay listing mentions Deuitch Wurlitzer which confuses me since that box was made in the USA.BTW do you have for sale a GOOD set of lid spring hinges for the 7500? Thanks Norman