Page 2 of 2
Re: SHP3 AMP test points
Posted: Tue Feb 12, 2013 1:58 am
by 70monte
found Q5124 bad replaced was then able to set bias on left and right at 1.5 volts... now i have very little volume out of the right speakers but fine out of the left side. I can switch leads and speakers do work. This is still progress.
will this hurt anything until this problem can be corrected?
Thanks Don
Re: SHP3 AMP test points
Posted: Tue Feb 12, 2013 6:49 pm
by Ron Rich
That "should not" "hurt" anything--Ron Rich
Re: SHP3 AMP test points
Posted: Wed Feb 13, 2013 5:46 pm
by 70monte
Ron thanks for all our help. I found input signal is missing from the stylist. Sure i'll get that taken care of. Now I have another one to start on.. Thanks again!
Don
Re: SHP3 AMP test points
Posted: Wed Feb 13, 2013 6:26 pm
by Ron Rich
Don,
That'll do it --every time--you are taking all my business away !! That's what I do for a living--
Ron