Page 1 of 1

Rockola 507 Wallbox

Posted: Mon Feb 22, 2010 9:51 pm
by burt6666
Hi,anyone have a wiring diagram for this?Looking to hook it up to my rockola 444 juke.Thanks.

Re: Rockola 507 Wallbox

Posted: Thu Mar 04, 2010 2:54 am
by burt6666
Bump...nobody ??????

Re: Rockola 507 Wallbox

Posted: Thu Mar 04, 2010 8:29 am
by Ken Layton
We never operated any Rockola's with wallboxes on our route. All we ever had were Seeburg 3W1 wallboxes connected to a Seeburg LPC1.

Re: Rockola 507 Wallbox

Posted: Thu Mar 04, 2010 12:10 pm
by ami-man
Hi Burt6666,

What does your Rock Ola 444 manual say with regards to connecting wall boxes to it?

Regards
Alan Hood
ami-man
UK

Re: Rockola 507 Wallbox

Posted: Thu Mar 11, 2010 12:43 am
by burt6666
I've got the proper stepper for it...just need the wiring diagram to hook them up.Had one that came with them but seem to have lost it.

Re: Rockola 507 Wallbox

Posted: Sat Feb 15, 2014 10:20 pm
by tmens82
hello im new to the site,,this is my 1st post..but i do have a rockola 444 and a 507 as well ..what stepper did you use?..thanks trevor

Re: Rockola 507 Wallbox

Posted: Sun Feb 16, 2014 12:43 am
by DoghouseRiley
I can list the connections in the wall box if that's any help.

There are seven in a line at the bottom left hand corner of the box.
From left to right they are.

25v A.C.
Signal Line
Lock Out Relay
Audio Control Relay
Left Speaker
Audio Ground
Right Speaker

Common, goes to a fixing point below this line of connections.

Re: Rockola 507 Wallbox

Posted: Sun Feb 16, 2014 1:07 am
by tmens82
That does help.....do you know what stepper works for them to combine

Re: Rockola 507 Wallbox

Posted: Sun Feb 16, 2014 2:08 am
by DoghouseRiley
tmens82 wrote:That does help.....do you know what stepper works for them to combine


Sorry I can't help you there, I just use that box to play stuff on my laptop.

Re: Rockola 507 Wallbox

Posted: Sun Feb 16, 2014 2:53 am
by tmens82
No worries i hope to figure it out seems that a rockoka 444 is not popular for wall boxes

Re: Rockola 507 Wallbox

Posted: Sun Feb 16, 2014 2:22 pm
by clones
There should be plug connectors at the base of the machine which will only suit that particular type of receiver/stepper, so hook them up with the stepper. Then there should be connections at the back of the machine near the back access door, they may be labelled or a diagram is usually printed in the inside of the access door which will correspond to the connections that Doghouseriley stated. They need to be wired from here to the wallbox to power it, provide audio and provide selections
regards
Clones

Re: Rockola 507 Wallbox

Posted: Tue Feb 18, 2014 4:17 am
by tmens82
I know you guys will like to hear this with me being new to this..i ordered the service books to the rockola,507 and 444..hope to get a answer on a stepper in those books