Phonoland

I recently bought a Rockola 460 and the problem I have is that there are no lights on the selection part of the machine. The only lights that come on are the make selection and reset light. When you put a quarter in it the make selection light comes on and when you push a button it goes to the reset button light and the buttons won't stay down. The lower light works. None of the numbers or the long flourescent light works either. I have checked all the fuses with an ohmmeter but thats about it. I don't have a manual. I would appreciate any help. Thanks Greg

Hi Greg,

The first thing to do is buy a manual so other members of this group can talk you through your fault and suggest the best way forward in terms everyone can understand.

Regards
Alan Hood
ami-man
UK

Did you check the connector to the selection pc board? It hangs straight down just below the magazine and may come loose when the machine is moved. Also, you may have to clean the selection pc board and the contacts. I had both problems on my 460.

Good luck,
Rob