RCA Victor 1VF306

Electrically amplified phonographs or radio/phonographs and related components (approx. 1928-1990).



Topic author
jcaplinger
Junior Member
Posts: 2
Joined: Sun Jan 08, 2012 10:35 pm

RCA Victor 1VF306

by jcaplinger » Sun Jan 08, 2012 10:44 pm

First time posting....
I've recently purchased a RCA Victor 1VF306 Console at a local auction in southeast KY. I must admit I'm a total novice in phonographs! Anyway, the device comes on and looks like everything works except the speakers. I've tried and failed to find anything on the internet concerning this model. Can anyone help be identify exactly what I've got and what might be the problem?

User avatar

MattTech
Senior Member
Posts: 1461
Joined: Tue Apr 29, 2008 7:38 am
Location: Philadelphia Pa USA - Home Electronics - Service Technician

Re: RCA Victor 1VF306

by MattTech » Sun Jan 08, 2012 11:48 pm

There may be missing jumper plugs on the rear of the console.
These are usually marked "for Total Sound extension speakers"
They are "D" shaped plugs with three pins - one at the top of the D, one in the center, and one at the bottom of the D.

If the plugs are missing, the two opposite plug connections can be connected together.
Ignore the center pin connection.

Other than that, I can't tell without looking at the unit, or having it on my workbench at the shop.
The Internet is a marvelous thing, however it's not a good substitute for actually being there.


Topic author
jcaplinger
Junior Member
Posts: 2
Joined: Sun Jan 08, 2012 10:35 pm

Re: RCA Victor 1VF306

by jcaplinger » Sun Jan 08, 2012 11:53 pm

Thanks Matt, I've confirmed that the jumper plugs are there and both are plugged in.

User avatar

MattTech
Senior Member
Posts: 1461
Joined: Tue Apr 29, 2008 7:38 am
Location: Philadelphia Pa USA - Home Electronics - Service Technician

Re: RCA Victor 1VF306

by MattTech » Mon Jan 09, 2012 4:28 am

For something made 40+ years ago and most likely never serviced, it's due.
Deterioration of the components in the amp are normal, and also cause a hazardous situation.
(avoid plugging it in until then)

As well, 40+ year old dried-up grease/oil in the changer will cause issues too.

Every set like that I get in the shop needs a complete "make-over" without a doubt, to perform reliably.
The Internet is a marvelous thing, however it's not a good substitute for actually being there.

Who is online

Users browsing this forum: No registered users and 4 guests

It is currently Thu Oct 06, 2016 5:31 pm