Page 1 of 1

Rock Ola 488 issue - won't pick up record after done playing

Posted: Mon Jul 07, 2014 7:53 pm
by dkazz1
Hi everyone. I'm new here but was recommended to visit here by Ken Layton.

I have a rock-ola 488 I just finished fixing up and running great, sounds great but am having one small issue. The jukebox picks up the record from the carousel and plays the record without any issue but for some reason when it's done playing, the mechanism does not grab the record and place it back where it belongs. Is there a simple adjustment for this?

I have a short video that I took of the problem so you could see what was going on:

http://s1206.photobucket.com/user/dkazz ... 4.mp4.html


Any suggestions would be appreciated.

Thanks!

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Mon Jul 07, 2014 8:32 pm
by clones
Hi
The gripper mechanism would need lubrication, if you lubricate especially the inner mechanism where spring is located and play a side records and hold the gripper arm down for a few seconds when the record is finished and do likewise with the b sides, this should solve it, don't hold it for too long or it will trip a breaker or blow a fuse
regards
clones

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Mon Jul 07, 2014 10:56 pm
by dkazz1
Thank you. I will give that a try. Do you have a particular type of lubricant that I should use?

Appreciate the help!

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Tue Jul 08, 2014 1:00 am
by clones
Hi
the lubricant usually mentioned in the forum is SAE 20 wt Non detergent oil
regards
clones

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Tue Jul 08, 2014 11:59 pm
by dkazz1
That did the trick. Thanks for the help, clones!

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Wed Jul 09, 2014 12:21 am
by Ron Rich
Hint: --re-oil it in a few hours--and "play the heck out of it"--re-oiling often, for the next few daze ( or it WILL, bind, again !) . Ron Rich

Re: Rock Ola 488 issue - won't pick up record after done pla

Posted: Wed Jul 09, 2014 2:22 am
by dkazz1
Will do! Thanks for the advice guys!