SEEBURG STD 160 PLAYS RANDOM

erik · by **erik** » Wed Nov 01, 2006 8:40 pm

Hi,i checked this forum for equal problems like mine,but didn't found one similar.
The Std 160 plays random,never know which he will play after.
When i push the reject button to stop,he will continue to another selection.
From time to time he will play single after single,but not every time.
I cleaned all the contacts at the tormat a few days ago.After that he works great,played every single i selected.A few days later the problem was there again.
Could anybody help me to find a solution ?

Thanks in advance !

Erik
Belgium

Record-changer · by **Record-changer** » Fri Nov 03, 2006 7:52 am

Check for hum in the selector power supply.

erik · by **erik** » Sat Nov 04, 2006 1:27 am

Hi,

thanks for replying.
but there is no hum in the selector power supply....

lionheart73 · by **lionheart73** » Thu Nov 30, 2006 1:54 am

there is an RCA connector that goes from the control unit in the top of the Juke box, to the tormat unit. you may want to try replacing that with a new cable, i just did it on my juke because it was having the same issue. (at first all i did was run a new ground wire, as suggested by tony from the forum, and it did work for a while, then the problem came back) for the moment it's playing just fine.

Hope this help

David

erik · by **erik** » Thu Nov 30, 2006 11:34 pm

Dear David,

Thanks.I will try your suggestion to replace a new cable.
But for the moment my jukebox is doing strange things...
When i make some selections,like nr 100,102,108,126 etc..,he is scanning twice ,he picks up 102,played the record,scanning again,picks up 126,playing and he stopped.So,he won't see the other selections I made.
But when i select again some numbers like 134,150,178 etc.,he scans and picked up a selection from the first input.Like the 100 he skipped before.
But,first i will try the new cable.
Thanks for the help you provided,

Erik

jukedoc · by **jukedoc** » Sat Dec 16, 2006 5:57 pm

IF you have not replaced the electrolitc caps on the power supply cba in the digital control center you should they cause 90% of the selection problems in this jukebox series.

gary · by **gary** » Mon Jan 08, 2007 7:03 pm

Hi, try this jukebox forum for help. There are some very knowledgeable guys there.

jukebox-list@lists.netlojix.com