Page 1 of 1
Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 11:06 am
by MrMario64
Could anyone provide a picture of the original metal Mirror mounted on the carriage in a Seeburg Disco?
If you could also post the dimensions of it that would be great!
I'm going to try and recreate one.
Thanks
With kind regards,
William
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 7:05 pm
by james301
Here is the mirror that came with mine, I measured 6" wide by 7" tall.
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 9:38 pm
by MrMario64
Perfect Thank you!
Do you also have a picture of the backside perhaps?
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 9:53 pm
by james301
Of course I do! Here it is.
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 10:02 pm
by Ron Rich
Hi Guys,
I do not recall ever seeing one with that "sideways slash" in it, as shown on the first photo ?
The one I have here, is smooth on both sides. Ron Rich
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 10:16 pm
by james301
On the first photo it is reflecting the garage ceiling, it's smooth all the way across like you said.
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sat Jan 04, 2014 10:44 pm
by MrMario64
Thanks for the pictures!
It's not really stainless steel right?
What kind of metal is it?
Also, could you measure the height and width of the cut pieces? ( I mean the openings for the record and the mounting (sorry not native english
))
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sun Jan 05, 2014 2:18 am
by Ron Rich
William,
Yes--It IS, stainless steel--12-14 gauge, "fair" quality, folded over on the sides for re-enforcement.
Ron Rich
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sun Jan 05, 2014 3:05 am
by james301
I hope you will forgive the fact it's a picture, as my scanner is being uncooperative today, but it should do. It is from the back (unreflective) side, and the distances are away from the closest side.
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Sun Jan 05, 2014 4:15 am
by MrMario64
This is perfect!
Thank you for all this information.
Re: Req: Picture and dimensions of original Disco Mirror
Posted: Thu Feb 06, 2014 11:16 pm
by MrMario64
Well, today I made this mirror out of an old piece of stainless steel.
It turned out pretty awesome!
Only needs a little bit of extra polishing still
Thanks again for all the help!
- IMG_0295.JPG (101.19 KiB) Viewed 626 times
- IMG_0294.JPG (107.33 KiB) Viewed 626 times