Page 1 of 1
Stepper question
Posted: Thu Jan 14, 2016 12:15 am
by ds100h
The manual I have for my Seeburg Q160 indicates that it takes a RSCU 1. Is this the same RSCU 1 that is in the KS/KD models and does it have the same prolems?
Why I ask is there is a seller on eBay that is selling an RSCU 2 that he indicates is for the Seeburg Q?
Best
Darrell
Re: Stepper question
Posted: Thu Jan 14, 2016 12:21 am
by Ron Rich
Darrel,
Which TSU / TSR is installed in your machine--that's what determines which RCSU is usable ( Look at the TJU--A TJU-2 requires replacement with a RCSU-2---- A TJU-3, may be replaced with either a RCSU-2, or 3). Ron Rich
Re: Stepper question
Posted: Thu Jan 14, 2016 2:03 am
by ds100h
Hi Ron
It has a TSU 2 installed. The lever is set to SPU. So I guess the RCSU 2 would work in the Q with no modifications, is that correct?
Best
Darrell
Re: Stepper question
Posted: Thu Jan 14, 2016 5:46 am
by Ron Rich
Darrell,
Yep--sounds as if it shood---for sure if a TJU-2 must be removed-- That however does not guar-anty, that the stepper works !!
Ron Rich