Page 1 of 1
bal ami junior
Posted: Sun Jun 27, 2010 10:27 am
by detra
hi everyone
i dont know if anyone can help with this model but i think i need replacement motor listed as r 291 or at least the nylon cog in side as it works with out chain but under pressure of chain attached it wont move.
i have made the mistake of restoring the cabinet before geting the machine to work properly so any help would be most welcome
thanks for looking
regards derek

Re: bal ami junior
Posted: Sun Jun 27, 2010 5:47 pm
by Ron Rich
Derek,
Check with the Stamanns--they may have either/both in stock--
stamann@jukebox-world.deRon Rich
Re: bal ami junior
Posted: Wed Jun 30, 2010 4:39 pm
by ami-man
Hello Derek,
Ron is correct Stanmann's may well be your best bet.
Is your jukebox listed on the
www.bal-ami.com website? If not go onto the site and check on the "where are they now" section and check your serial number against the list. If it is not listed contact John with your number and he will include it.
The site offers the history of the Bal-Ami company etc, well worth a look.
Regards
Alan Hood
ami-man
UK
Re: bal ami junior
Posted: Sun Jul 04, 2010 12:12 pm
by detra
thanks for replys i bought the manual from the stanmenns site so will have a look there
i cant find a serial number on it would it have been on rear?
Re: bal ami junior
Posted: Mon Jul 05, 2010 11:12 am
by ami-man
Hi Derek,
Glad to hear that Hildegard & Oliver Stanmann sorted you out with the manual.
The serial number is normally on the back door, I think John at
www.bal-ami.com can get information on the jukebox from the Mechanism serial number, if the serial number plate is still on the mechanism.
Regards
Alan Hood
ami-man
UK
Re: bal ami junior
Posted: Fri Oct 07, 2011 3:02 pm
by detra
cant find the parts i need its now up for sale as a non worker any offers conconsidered
Re: bal ami junior
Posted: Fri Oct 07, 2011 3:41 pm
by ami-man
Hello Derek,
I am now on holiday for a week from tonight but if you send me some pictures of the parts you need I will see what I can come up with.
Regards
Alan
Alan Hood
ami-man
UK
alan-hood@datex.co.uk
Re: bal ami junior
Posted: Fri Oct 07, 2011 7:15 pm
by detra
hi alan
i have a manual i will get part nos and take some photos many thanks
regards
derek
Re: bal ami junior
Posted: Sat Oct 08, 2011 9:56 pm
by ecs446
The picture looks very much like the USA F model. Do the motors for your machine use the same voltage as the USA machines?
If they do, I think I have a motor.
Edwin
Re: bal ami junior
Posted: Sun Oct 09, 2011 8:18 am
by detra
Hi Edwin
It's running 240 volts I am not sure if it's got a transformer will take a look
Regards Derek