Phonoland

Posted: **Wed May 03, 2006 6:02 am**

I would like to know where I can get this idler wheel rebuilt or replaced.

Thank you

The Duke

Posted: **Thu May 04, 2006 4:14 pm**

I know that http://www.turntablebasics.com will rebuild idler wheels. I have never used them, so I can not attest to the quality, but they do rebuilds. Hope this helps & if you use them, please let me know how it comes out.

Posted: **Thu May 25, 2006 12:43 am**

mhtheduke wrote:I would like to know where I can get this idler wheel rebuilt or replaced.

Thank you

I think that the F model is close to the E model. I replaced the rubber on my E with a pinball flipper rubber (the smallest one) and it worked very well.
It was kind of like putting a wide oval on my juke box.
I pulled the old rubber off the rim, and worked the flipper rubber on.
Had trouble centering the rubber but found out that running on the turntable automatically centers the rubber.
Good Luck
The Rascal

Phonoland

Idler Wheel for a AMI F120

Idler Wheel for a AMI F120

Re: Idler Wheel for a AMI F120