Page 1 of 1
Seeburg M100C 15" speaker resistance values
Posted: Tue Oct 16, 2012 2:59 pm
by steve_b10
Ron,
Can you please provide me with the "C" voice coil and field coil resistance values for the 15" speaker, and also tell me which speaker wire color pairs test each coil. I see a blue, yellow and white, plus a black "jumper" at the plug (colors may be off a bit due to age).
Thanks,
Steve
=====
Re: Seeburg M100C 15" speaker resistance values
Posted: Tue Oct 16, 2012 5:01 pm
by Ron Rich
Steve,
That's in the Service Manual, on the amp schematic age--just from memory, 8 ohm/5200 ohm--only three wires--one common, other two to each coil---check me-- Ron Rich
Re: Seeburg M100C 15" speaker resistance values
Posted: Tue Oct 16, 2012 10:18 pm
by steve_b10
Hi Ron,
Yes, that information was in the service manual where you indicated. I missed it. The values stated for the speaker in a MRA3-L6 are 8 ohms voice coil, 5600 ohms (hot) field coil. Could you please tell me the proper way to determine the hot field coil resistance. Does "hot" literally mean that the speaker is plugged in and warmed up? What would a resistance reading be if the speaker coil was not "hot" (room temp)?
Thank you, Steve
Re: Seeburg M100C 15" speaker resistance values
Posted: Wed Oct 17, 2012 12:36 am
by Ron Rich
Steve,
I dono--all I have ever checked have been around 5k-5.5k---
Ron Rich