Phonoland

Posted: **Wed Apr 30, 2014 5:10 am**

Hi
Does anyone know which pins need to be "jumped" on the powered remote volume control socket, located on the power supply of a Rock-Ola 440 when the remote unit is not plugged in?

When the remote volume unit is absent the whole jukebox is "dead" without the jumper plug. My manual doesn't show the power supply in any detail - I think the manual is geared more toward the 437.

Posted: **Wed Apr 30, 2014 5:31 am**

Are these of any use?:

http://www.verntisdale.com/Rockolaschem.htm

In particular:

http://www.verntisdale.com/schem/440a.JPG

Rob/NYC

Posted: **Wed Apr 30, 2014 8:59 pm**

Pin 9 jumps to Pin 15
and
Pin 7 jumps to Pin 14

: 20140430_145404.jpg (226.46 KiB) Viewed 536 times

Posted: **Wed Apr 30, 2014 9:25 pm**

Awesome, thanks - just what I needed.

Posted: **Fri May 02, 2014 9:25 pm**

I don't believe this! Now I need the same thing for a Rock-Ola 490. If anyone could help I would really appreciate it. They say things come in threes, I hope the next Rock-Ola I buy doesn't have a jumper missing.

Posted: **Sat May 03, 2014 2:32 am**

Keith,
It's probably the same---
Ron Rich

Posted: **Sat May 03, 2014 2:36 am**

PROBABLY? I wouldn't like to jump the wrong pins.

Posted: **Sat May 03, 2014 2:44 am**

Well, then check the schematic --
Ron Rich

Phonoland

Rock-Ola 440 PRVC Jumpers

Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers

Re: Rock-Ola 440 PRVC Jumpers