Seeburg G motor cap?

mb9513 · by **mb9513** » Thu Oct 08, 2015 5:51 am

Hi all: am finishing a hf100G. it has started to not want to start the motor when the last selection was a B side. I have to grab the turntable and "help" it to start then it runs fine. if the last selection was an A side it works ok. I know that the load mechanism is partially engaged after the last selection. So I have lubricated everything I can get too. if it is just scanning, it works ok as well, reversing with no problem. using the motor stop toggle I started and stopped both directions. that is fine too. so I need some suggestion of if this is a motor cap issue, or am I missing some adjustment, or lubrication point on the mech. I don't have a spare cap so want to be sure before I get another one. thanks in advance. Mark

ds100h · by **ds100h** » Wed Oct 21, 2015 2:44 am

Good News! Replaced the motor run cap and all is good! Here is a link if you would like to see the finished product https://www.youtube.com/watch?v=vAK1W62 ... e=youtu.be Seeburg HF1005

Best
Darrell

juke46 · by **juke46** » Wed Oct 21, 2015 12:58 pm

Very nice job! Looks and sounds great!! Good music selection too!!
David (Geritol Ghetto)