by Ron Rich »
Tue Aug 16, 2016 4:07 pm
Hi Patrick, and all,
IMHO,on this type of RO pricing unit, there is a "faster/easier" way to accomplish this-- simply look at the relay that engages with the wheel, remove "front" one of the mounting screws form the underside, loosen, the other one, slightly, and twist the relay so the actuator, misses the wheel when the relay is activated.--Tighten that one remaining screw tight--be sure there is a lock washer under it (or a sems screw has been used)-- ( about a ten second, easily REVERSIBLE, job) Ron Rich