1972 rowe mm6 jukebox pushbutton Selector

srogamike11 · by **srogamike11** » Fri Nov 08, 2013 12:33 am

Hi' I have rowe mm6 and the bushbutton selector doe's not work. It is set on freeplay If I push down on the R1 relay it stays
down and i can push buttons they stay in. When I push the R5 relay the buttons pop out nothing works.I've cleaned all the
contacts it didn't work.I've cleaned the credit unit too.It seem like there's no power to pull R1 relay down.could it be the
capacitor,resistor or diodes on the selector? Mike.

by **ami-man** » Mon Nov 11, 2013 1:18 pm

Hello Mike,

Welcome to the forum.

Have you checked the AC & DC power rails on the power supply unit.
Have you checked these again at the service switch and at the Molex plug on the side of the mechanism/carousel.

If these locations are all good then you can starting looking at your schematic to trace the fault down.

Regards
Alan

Alan Hood
ami-man
UK