Page 1 of 1

ID Vr100 & VR101 please... NSM ES 160 Festival

Posted: Tue Mar 01, 2016 4:29 pm
by NSMES160Jukebox
Hi Folks,

Can anyone help in identifying a component that needs replacing... Vr100 (same as VR101) its a Varistor for voltage surge protection of the motors on the caddy... I know it will work without these, but protection is always a good thing...

Value n voltage rating please....
Thanks

Re: ID Vr100 & VR101 please... NSM ES 160 Festival

Posted: Tue Mar 01, 2016 4:45 pm
by Ron Rich
My knowledge of variable resistors is poor-- I have noted that they were rated at 120 Volts when used here in a protective circuit for the mains voltage (which IS 120) . You might try t search ("google") it, on the net -- Let us know what you find. Ron Rich

Re: ID Vr100 & VR101 please... NSM ES 160 Festival

Posted: Tue Mar 01, 2016 4:51 pm
by NSMES160Jukebox
Hi Ron,

Turns out they're not cap's as I previously thought... bit of research is a good thing :)
Mains voltage in Ireland is 230V, however I believe the voltage in the caddy area is around 50V? I'll have to get my meter out and power up the board...
Thanks for the info...

Re: ID Vr100 & VR101 please... NSM ES 160 Festival

Posted: Wed Mar 02, 2016 10:52 pm
by clones
Hi
Just managed to dig up a parts manual - VR100/101 are listed as VDR-resistor with no values given. I have often seen carriages working away with one or both blown.
clones

Re: ID Vr100 & VR101 please... NSM ES 160 Festival

Posted: Sat Mar 05, 2016 12:19 pm
by NSMES160Jukebox
Thanks Clones,

I've read that they are not needed, but wold be nice to have the protection, they work like a fuse to protect against power surge...
Bit like a spark gap in the old CRT tv's...