Seeburg V200 grill castings / BULBS

PTL8GRANDKIDS · by **PTL8GRANDKIDS** » Wed Oct 29, 2014 3:01 am

Hi People, I just purchased a Seeburg V200 and I need to replace one of the front grill castings approx 1- 1/3 inches long. I saw one on Ebay, but it was a different size. Any info on that and bulbs would be appreciated . Thanks --Preston Syracuse NY--

by **Ron Rich** » Wed Oct 29, 2014 4:59 pm

Hi Preston,
Check with the "legit" suppliers, listed above this post, in the "stickies"--BTW--the part number from the book usually helps-- Ron Rich

PTL8GRANDKIDS · by **PTL8GRANDKIDS** » Sun Nov 09, 2014 7:59 pm

Hi Ron, Thanks for the tip on the grill casting. I was able to locate one on Craigslist Detroit MI. --Preston Syracuse NY..

Rob-NYC · by **Rob-NYC** » Mon Nov 10, 2014 12:11 am

Preston, I buy the 33" tubes from:
https://www.1000bulbs.com/search/?q=+F25T12%2FCW%2F33 I buy a box of 30 at a time.

The 20watt tube you can get locally and the #63 for the medallions and the #47 for the annunciator are both available at:

http://www.pinballlife.com/index.php?p= ... ent=3&pg=1

Or:

http://www.pbresource.com/lamps.html

I suggest ordering a half dozen of the 33" as I expect them to be phased out over the next few years. Check with them to see if they carry the miniatures (63 & 47) too.

Rob/NYC