Page 1 of 1

Rockola 449

Posted: Sun Sep 16, 2007 10:02 am
by lewjoubert
Rock-Ola 449

I have a problem whereby the third digit won't select if it is a 3.

ie: Selecting any of these numbers 103,113,123,143,153,163,173,183,193
results in nothing happening.
Select 1st digit and second digit, solenoid under key selector engages,
select the third, any number except a '3' and the box works.

Any ideas where to start looking?

Thanks, Lew.

Problem Solved

Posted: Tue Sep 18, 2007 1:57 pm
by lewjoubert
Due to bad plug connections in harness between selecter switch bank and rest of loom at bottom of cabinet.

Re: Rockola 449

Posted: Fri Nov 07, 2008 6:04 pm
by Guest
All the numbers at the top which tell you which selection is playing don't work, after I replaced all the numerous bulbs. Any ideas?
Thanks
John

Re: Rockola 449

Posted: Fri Nov 07, 2008 6:06 pm
by Guest
Guest wrote:All the numbers at the top which tell you which selection is playing don't work, after I replaced all the numerous bulbs. Any ideas?
Thanks
John



Please e-mail me JohnA.Gervais@cra-arc.gc.ca

I am also looking for an operating manual for this unit.

Re: Rockola 449

Posted: Sat Nov 08, 2008 2:14 am
by Ron Rich
That Service manual, and most all others, are available in a good quality re-print, from http://www.alwaysjukin.com and other sources. Watch out--SOME of the Ebay copies are very poor ! I do not have a 449 manual, nor do I remember that circuit. Ron Rich