Phonoland

I have a Seeburg AY-160 with a Tormat Selector Unit TSU1/TSU3 along with a Remote Control Stepper Unit RCSU2.

Question.
Can I buy a Wall-O-Matic unit and expect to simply hook it up to the RCSU2 with a wire cable or do I need additional hardware between the Wall-O-Matic and the AY-160?
I mean to say, assuming both the RCSU2 and the Wall-O-Matic is operating properly does it only need a wire connecting the two to work together (Or does it need additional power supplies/junction boxes etc)?

Also, which model or models of Wall-O-Matic units are compatible with the AY-160? The manual I have for the Jukebox discusses certain accessories such as the remote volume control but I can not find any technical information about the Wall-O-Matics such as installation guides, schematics etc. Just pictures of different types Wall-O-Matic units.

Thank you in advance.
-Steve

Steve,
Any Seeburg 200/160 selection WallOMatic will operate on your AY.
All use three wire cable--instructions in the Manual that was supplied with the WallOMatic--available where "Books" are sold-- see above-- Ron Rich

I noticed the SC-1 Wall-O-Matic has a rotor disk & motor and I can get one fairly cheap. Can this be made to work on the AY160 to select songs or is it impossible?

Steve,
"Can be" --yes--practical, nope--not really--"lotza" work !! I done did it, once--won't ever again--
Ron Rich