Page 1 of 1
HF100R selection noise
Posted: Wed Apr 27, 2016 9:53 pm
by PTL8GRANDKIDS
Hi, The issue is a quick clicking noise (approx.3 seconds) when making any number/letter selections. After selecting 3 or 4 records the clicking noise stops. Your help please. Preston--Syracuse NY
Re: HF100R selection noise
Posted: Wed Apr 27, 2016 11:28 pm
by Ron Rich
Hi Preston,
And from where is this noise coming from ??
Ron Rich
Re: HF100R selection noise
Posted: Wed Apr 27, 2016 11:31 pm
by PTL8GRANDKIDS
Hi Ron, I think it is coming from the credit unit. Preston --- Syracuse NY
Re: HF100R selection noise
Posted: Wed Apr 27, 2016 11:40 pm
by Ron Rich
Attza whut I thunked you wood say--oil it!!
The credit wheel and all of the shafts require -ONE- drop of 20 wt. oil, every once and awhile--do NOT allow this to continue, or you WILL ruin the revolving credit wheel ! Do NOT oil the coil/plunger --it must be clean, and have the copper plug installed in the stop !
Ron Rich
Re: HF100R selection noise
Posted: Thu Apr 28, 2016 1:47 am
by PTL8GRANDKIDS
Hi Ron, I put some oil on the credit wheel I think i'm good now. However I'm nut sure about the cooper plug you wanted installed in the stop. Thanks, Preston
Re: HF100R selection noise
Posted: Thu Apr 28, 2016 4:49 am
by Ron Rich
Hi Preston,
You need to oil the wheel, the wheel "pusher" (under the round spring) and the ratchet "catcher" post.
The copper plunger stop was factory installed--if broken off and inside the coil sleeve, it will "jam" and cause what you were experiencing.
Ron Rich