Turntable rubber belt for Wurlitzer 2150

COASTERS1969 · by **COASTERS1969** » Tue Apr 19, 2016 5:16 pm

Hey - What's the easiest way to replace an old drive belt on a Wurlitzer 2150? Does it require removing any parts first? Thanks! Bob C.

Rob-NYC · by **Rob-NYC** » Wed Apr 20, 2016 4:36 pm

Bob, nothing need be removed.

Select an empty record slot and turn off power when the machine goes into play mode.

Pull back on the circular flange in the center of the flywheel to clear the two rollers and work the new belt around the rollers and onto the flywheel and motor pulley. It is likely that some oil will get on the new belt during this process so a use a little rubbing alcohol on a piece of paper (i use a square of toilet paper).

The old belt can be either cut off or removed by reversing the method above.

Rob/NYC

COASTERS1969 · by **COASTERS1969** » Fri Apr 22, 2016 4:18 pm

Thanks Rob! That worked just fine. Bob C.

MattTech · by **MattTech** » Sat Apr 23, 2016 2:30 am

Rob-NYC wrote: (i use a square of toilet paper).
Rob/NYC

Ronnie Rich uses half a roll to wipe his....... oops.