Page 1 of 1
Need to freeplay a NSM Laser Disc Wall hung
Posted: Sat Jan 24, 2015 9:51 pm
by jukeboxrobert
I am trying to freeplay a NSM Laser Disc wall hung. I think it's ES-5. I could only come up with a Firebird manual and tried to follow it's programming. I open door, pull service sw., program 094 h 200 h close door, but still shows 00 credits. I am missing something, but I don't know what. I think it should show 99 credits when done but never does.
I am sure it's operator error, but if somebody could bail me out it would be appreciated. I have never had a NSM before and this may be my last.
Re: Need to freeplay a NSM Laser Disc Wall hung
Posted: Sun Jan 25, 2015 1:20 am
by Ron Rich
Hi Robert,
You will need to read the label on "chip"--is it ES-5, or ES-5.1 ? "Firebird" was ES-4, which as you have discovered is different. You will need to find a copy of the correct "cheat-sheet" for the one you have---sorry, I no longer have either, nor do I think I ever "free play'ed" one-- Ron Rich
Re: Need to freeplay a NSM Laser Disc Wall hung
Posted: Sun Jan 25, 2015 2:37 am
by clones
Hi
Try P094h and 202h or try P090 and 0h, see how it goes
clones
Re: Need to freeplay a NSM Laser Disc Wall hung
Posted: Sun Jan 25, 2015 3:27 am
by ds100h
Hi Robert
Have you tried George Sammons? Here is a link to his site
http://nsmvinyljukeboxrepair.com/He is the Ron Rich of NSM and should be able to help you.
Best
Darrell
Re: Need to freeplay a NSM Laser Disc Wall hung
Posted: Mon Jan 26, 2015 2:53 pm
by Marcel
just a test reply.