Rowe AMI MM2 transfer motor assy

Received the rebuild kit, it is exactly as pictured. what was once a fiber gear has been replaced by a steel gear. Rebuild went as expected fairly easy. Reinstalled in the jukebox and now am having a problem with the seek function, when I press the buttons they don't "lock" I have cleaned the S1 and S2 contacts with paper as suggested elsewhere in the forums, also cleaned the wiper contacts with a pencil eraser. I don't know if someone has had the seek assembly apart or not, are there any quick tips or suggestions? I am ordering the repair manual next week. I can get the transfer part to work by manually rotating the cam. The transfer motor runs great, and the transfer section is working as designed as far as I can see.

Thanks,
Bill

update:
After some extensive searching, located a partial wiring diagram. Found someone previously re-soldered/re-wired the S2 contacts, had 4 of the wires in the wrong place. I rewired per schematic and made a couple of other adjustments and now have a working jukebox!