Page 1 of 1
I need Some Help to Identify this 1970s tape deck.
Posted: Mon Dec 10, 2012 11:17 pm
by DoghouseRiley
The belt on this Sharp deck has stretched. So it will play but won't wind or rewind. Although I rarely use it, I might as well have it in working order. I could measure it by looping a bit of string round the pulley wheels and deducting 10% or whatever to get the size, but if I knew the number, I could get exactly the right belt as I did for the similarly aged Philips turntable to the right of it, a couple of years ago. I've had it from new and there's no model number on it.
Re: I need Some Help to Identify this 1970s tape deck.
Posted: Tue Dec 11, 2012 10:17 am
by Rob-NYC
Re: I need Some Help to Identify this 1970s tape deck.
Posted: Tue Dec 11, 2012 12:36 pm
by DoghouseRiley
Thanks for that Rob, it's something similar but not quite the same.
I guess it's "simple" to find anything if you know exactly where to look.
It wasn't as if I hadn't tried.
Re: I need Some Help to Identify this 1970s tape deck.
Posted: Wed Dec 12, 2012 6:01 am
by Rob-NYC
"Dog" my point is that if the external controls look the same there is a strong likelyhood that the internals mech is similar.
So, if that search tuns up a pic of an RD-423U, another search tuns up a suggested belt:
http://www.turntableneedles.com/Square- ... p_454.html -scroll down.
In this sort of case, I'll also measure.
Rob
Re: I need Some Help to Identify this 1970s tape deck.
Posted: Wed Dec 12, 2012 5:50 pm
by DoghouseRiley
Hi Rob, I found it is a variant of a 423, so I expect the belts will all be the same, anyway I've placed an order.
Thanks for your help.
Regards,
Bob.
Re: I need Some Help to Identify this 1970s tape deck.
Posted: Wed Dec 12, 2012 10:00 pm
by Joe_DS
I did a little more checking on the radiomuseum site and came up with this, which to my untrained eyes, looks just like the one you have:
http://www.radiomuseum.org/r/sharp_ster ... _442x.html