Phonoland

Need some help. I am located in Waterloo, Wi. That is between Madison and Milwaukee.
I have a Seeburg FC1 (1973 model) that we bought 25+ years ago. It worked fine until a few weeks ago. Now it does the scan and no selection thing. I found a blow fuse in the control (DCC1). It is on the board on the top and to the back. The fuse it the one on the top. I changed the fuse and it just blows again. I have read all the stuff about checking the read/write etc etc. I don’t have the equipment to check and don’t know where the various things they say to check are. I work with computer software (day job) and my hobby has been restoring cars. (Might switch to jukeboxes once I figure this all out).I can fix almost anything if I know what is wrong. Is there anyone in the area that would consider giving me a hand? I will fix it just need to know what I need to change. I will buy the beer.

Thank you,
Joe

Since you offered--for about the price of a couple of six-packs, you could buy my "Seeburg Microlog Trouble Shootting Guide", and you could do the updates to that board--whatever you do ==Do NOT change that fuse again !-Hopefully it did not exceed an 8/10 amp--contact me "off list" if you like. Ron Rich ronnnrich@yahoo.com