Page 1 of 1
Perpetuum Ebner Rex AA Cartridge Problem
Posted: Sun Nov 29, 2015 4:16 am
by gpride
Looking for some help.
I manage to pull out the cartridge from my PE Rex AA. There is a collar piece that came out and i am struggling to get it back in the right location.
Any help would be super.
Re: Perpetuum Ebner Rex AA Cartridge Problem
Posted: Sun Nov 29, 2015 7:37 am
by MattTech
Do your records a favor and upgrade from that antiquated cartridge.
They're really not worth the trouble fussing over.
Re: Perpetuum Ebner Rex AA Cartridge Problem
Posted: Mon Nov 30, 2015 4:01 pm
by gpride
Ok I'll bite what are my options?
MattTech wrote:Do your records a favor and upgrade from that antiquated cartridge.
They're really not worth the trouble fussing over.
Re: Perpetuum Ebner Rex AA Cartridge Problem
Posted: Mon Nov 30, 2015 5:58 pm
by MattTech
All depends on the TYPE of cartridge involved.
Magnetics read ohms on the terminals, and the chassis includes a preamp to deal with them.
Ceramics or crystal types read "open"
But defective magnetics can read "open" as well.
Tracking force on those PE changers is usually heavy due to their crude design.
So this is of importance when making a decision.
Without knowing specific details of the unit, it's impossible for me to determine the possibilities across a computer screen.
I'm good, but not "that" good.
I will state that anything of that vintage will require much more than a cartridge by now.
Re: Perpetuum Ebner Rex AA Cartridge Problem
Posted: Tue Apr 12, 2016 8:24 pm
by vaguy2222
I replaced that cart with a Tetrad it went into a late 50s Grundig (MONO) Cart has 1/2 inch mounting centers so there is a large number of carts to choose from. BTW the cart in the picture is a magnitc. as to the loose bracket in puicture. it was rivited to the base. rivets were broken on yours. Good luck
